Family-owned, licensed & insured. Free in-home estimates in Arlington and nearby cities. Call (817) 555-0123
Solid & engineered hardwood
Solid and engineered hardwood installed over Arlington slab foundations and wood subfloors, with moisture testing before the first board goes down.
Family-owned · Licensed & insured, Lic. #238190 · Financing available
If you want hardwood floor installation in Arlington, TX, the most important work happens before the first board is fastened: confirming the slab or subfloor is dry, flat and ready. Most Arlington homes sit on concrete slabs poured during the city's big growth years, when the population climbed from about 90,000 in 1970 to more than 260,000 by 1990 (U.S. Census Bureau). Those slabs can carry a beautiful wood floor, but only with the right product and the right installation method.
We install solid and engineered hardwood in living rooms, bedrooms, hallways and whole-home projects across Arlington, Pantego, Mansfield and Grand Prairie. Every quote spells out the species, width, finish, prep work and trim, so you know exactly what you are paying for before we schedule a single day of work.
Every hardwood installation we quote in Arlington includes the following, listed on your estimate so nothing is assumed:
Not every worn wood floor needs replacing. Solid hardwood can often be sanded and recoated instead (see hardwood floor refinishing). New installation or replacement makes more sense when you notice:
The two big decisions are construction (solid or engineered) and species. Hardness is measured on the Janka scale, the force needed to press a steel ball halfway into the wood.
| Species | Janka hardness | Look and best fit |
|---|---|---|
| Red oak | 1,290 lbf | Warm tone and strong grain, the classic North Texas floor |
| White oak | 1,360 lbf | Tighter grain that takes modern natural and gray stains well |
| Hard maple | 1,450 lbf | Smooth and bright, but can blotch under dark stain |
| Hickory | 1,820 lbf | Very hard with rustic color variation, good with pets and kids |
Solid hardwood, usually 3/4 inch thick, can be refinished many times, but it needs a wood subfloor or a plywood system over concrete. Engineered hardwood has a real wood wear layer over a cross-ply core, so it is more dimensionally stable and can be glued directly to a slab. For most Arlington slab homes engineered is the practical choice; our engineered hardwood installation page compares the two in more depth.
Your written quote is built from these factors, each shown as its own line:
We price the job as a whole rather than quoting a vague per-foot number over the phone, because prep work is where most surprise costs hide.
Arlington summers are long and hot, with July highs averaging in the mid 90s, so most homes run air conditioning for months and indoor air gets dry. A wet spring can push humidity right back up. Wood expands and shrinks with those swings, which is why we recommend keeping indoor relative humidity roughly between 30 and 50 percent, the range NWFA guidance gives for most wood floors. Much of the city also sits on expansive clay soil that swells when wet and shrinks in drought, and that can move a slab over time. In homes with a history of foundation repair, we usually recommend engineered planks or a floating installation that tolerates small movement better than a rigid glue-down.
Why choose us
2%
max moisture difference for wide plank
Cupping, gaps and buckling usually start as moisture problems, not bad boards. We read the slab or subfloor and the flooring itself, and we do not install until the numbers fall within NWFA limits: a 2% difference for planks 3 inches and wider, 4% for narrower strip flooring. You get the readings in writing, so you have a record if a warranty question ever comes up.
3
installation methods, chosen per subfloor
Nail-down, glue-down and floating installs each have a place. Solid 3/4 inch boards nail to plywood. Engineered planks glue to concrete with a moisture-blocking adhesive. Floating floors suit homes with a history of foundation movement. We use the method the manufacturer warrants for your subfloor, not whichever one is fastest to install, and we explain the tradeoffs in feel, sound and refinishing life before you decide.
6
documented steps, measure to walkthrough
Your written quote lists species, square footage with waste factor, underlayment, subfloor prep, removal, trim and labor as separate lines. That makes it easy to compare against other Arlington bids and avoids surprise charges once the old floor comes up. If we uncover hidden damage, we show it to you and price it before any extra work begins.
Free estimate
One call books your in-home measure, and you get a written, itemized quote after the visit.
Mon to Fri 7 AM to 6 PM · Saturday 8 AM to 2 PM · Financing available
Our job-site standards
No surprises on install day. These standards apply to every room we touch, from a single bathroom to a whole house.
We test concrete slabs and wood subfloors before installation and record the numbers on your job sheet.
We check the floor with a long straightedge and fix humps and dips to the flooring maker's tolerance.
Material, underlayment, prep, removal, trim and labor are listed line by line, so you can compare bids.
Floor protection on walkways, plastic dust barriers where we cut or sand, and doorways kept clear.
Debris hauled out, tools stacked, and rooms left usable at the end of each workday.
We walk every room with you, fix anything you flag, and leave labeled spare boards or tile for future repairs.
FAQ
Engineered hardwood can be glued directly to a clean, flat, dry slab or floated over a moisture barrier. Solid 3/4 inch hardwood generally needs a plywood subfloor installed over the concrete first. We test the slab before recommending either option.
A prefinished floor covering 500 to 800 square feet usually takes 2 to 4 working days once the material has acclimated. Site-finished floors add time for sanding, staining and several coats of finish, plus drying time before furniture goes back.
Choose solid if you have a wood subfloor and want the most refinishing life. Choose engineered for slab foundations, homes with foundation movement, or rooms where humidity swings. Both have real wood on the surface.
There is no fixed number of days. NWFA guidance is to acclimate until the flooring's moisture content is within range of the subfloor: within 4% for strip flooring under 3 inches wide and within 2% for wider planks. We measure instead of guessing.
Harder species and low-sheen finishes hide wear best. Hickory, at 1,820 lbf on the Janka scale, and white oak, at 1,360 lbf, with a matte finish and natural color variation are popular choices for Arlington families with pets.
Also serving
Solid and engineered hardwood for Grand Prairie homes of every age, with the slab or subfloor tested and the installation method chosen before any wood is delivered.
Engineered and solid hardwood for Mansfield homes, most of them built since 2000, with the slab tested and the fastening method planned around how the house was built.
Engineered and solid hardwood for Euless houses and townhomes, with the slab tested and the fastening method chosen before any wood is ordered.
Engineered and solid hardwood for Bedford homes, installed after the old parquet, vinyl or carpet comes up and the slab underneath has been checked and prepared.
Engineered or solid hardwood for established Hurst homes, planned around the slab, the door heights and any original oak already in the house.
Kennedale hardwood floors planned around the slab underneath and the size of the house, with moisture readings taken before a single box of wood is delivered.
Keep exploring
Installation
Refinishing & Repair
Installation
Call for a free in-home estimate. We measure, test the subfloor and leave you a written quote.
Call (817) 555-0123Mon to Fri 7 AM to 6 PM · Saturday 8 AM to 2 PM · Licensed & insured, Lic. #238190
