Family-owned, licensed & insured. Free in-home estimates in Arlington and nearby cities. Call (817) 555-0123
Epoxy, polyaspartic & flake systems
Diamond-ground, moisture-tested epoxy and polyaspartic coatings for Arlington garages, porches, patios, shops and warehouses, sealed with a UV-stable topcoat built for Texas sun.
Family-owned · Licensed & insured, Lic. #238190 · Financing available
If you want epoxy floor coating in Arlington, TX, the finish you see is only as good as the bond you can't see. A garage coating that peels in strips, lifts under hot tires or turns yellow by the second summer almost always failed at the prep stage, usually because the slab was acid etched or simply cleaned instead of mechanically ground.
We are a family-owned, licensed and insured crew with more than five years of hands-on coating work. We diamond grind every slab, repair cracks and spalls, test for moisture and then build the system in layers: base coat, broadcast and a clear topcoat matched to how the floor will be used. Our recent work includes a full-flake garage and a front entry and porch here in Arlington, plus polyaspartic garages in Fort Worth. You can see the before and after photos and videos in our project gallery.
Every coating quote spells out the system, the number of coats and the prep, so you can compare it against a cheaper one-day "paint" bid:
Bare concrete soaks up oil, tire marks and road grime, and it sheds dust every time you sweep. A coating is worth a look when you notice:
The right system depends on sun exposure, traffic and the look you want. Here is how the common options compare:
| System | Best for | Good to know |
|---|---|---|
| Flake epoxy with polyaspartic topcoat | Garages, workshops, laundry rooms | Hides slab blemishes, adds grip, topcoat resists UV yellowing |
| Full polyaspartic system | Garages and patios with sun exposure | Fast cure, often walkable the same day, higher material cost |
| Metallic epoxy | Interior rooms, showrooms, bars | One-of-a-kind marbled look, best kept out of direct UV |
| Solid color epoxy | Shops, storage, utility rooms | Clean and bright, shows dust and scratches more than flake |
| Quartz broadcast | Commercial kitchens, wet areas, ramps | Very durable, textured for slip resistance |
Aromatic epoxies tend to amber when sunlight hits them, which is why we top most garage and patio floors with an aliphatic polyaspartic that stays clear. Return-to-service times vary by product: many epoxy systems need about 72 hours before you park on them, while polyaspartic topcoats often allow foot traffic the same day and vehicles in about 24 to 48 hours.
Coating quotes vary more than most flooring quotes because prep and system choice swing the labor. Your written estimate breaks out:
Financing is available on approved credit if you would rather spread the cost out. Ask about it when you call, and we will include the options with your quote.
Arlington garages take a beating that a basement floor up north never sees. Many homeowners leave the door open on summer afternoons, so west-facing garages and uncovered patios get direct sun on the slab for hours, and that UV is what turns a plain epoxy amber. Tires come home hot off I-20 and Cooper Street and sit on the floor while they cool, which is exactly when a thin, poorly bonded coating starts to lift. Most homes here also sit on slab foundations over expansive clay, so hairline cracks are common and can reopen as the soil moves. That is why we grind instead of etch, fill and grind cracks before coating, and finish most garage and porch floors with a UV-stable polyaspartic topcoat. If your slab also needs leveling or major crack work first, our subfloor repair and leveling page explains how we handle it.
Real projects
Real before and after work from our crews. Tap a project to see every photo and video.
Video
Arlington, TXResidential Garage Floor CoatingFull-flake garage floor coating
Arlington, TXFront Porch and Entry Floor CoatingResin coating with fine flake blend
Video
Fort Worth, TXPolyaspartic Flake Garage, Start to FinishPolyaspartic flake system
Metallic Marble Epoxy Interior FloorCustom metallic epoxy
Why choose us
CSP 2-3
ground profile under ICRI 310.2R
Acid etching and degreaser washes leave a smooth, weak surface that most coatings cannot grip for long. We diamond grind every floor to the profile the coating maker specifies, usually around CSP 2 to 3 on the ICRI scale, with HEPA dust extraction. That open surface is what keeps the base coat bonded when hot tires, cleaners and Texas heat go to work on it.
Lic. #238190
licensed, insured and family-owned
We are a family-owned business, licensed under License #238190, fully insured and backed by more than five years of professional coating and flooring work. The same crew that quotes your floor shows up to grind and coat it. You get a written scope, a written cure schedule and a direct phone line if anything on the floor ever needs a second look.
UV-stable
aliphatic polyaspartic topcoats
A garage with the door open to the afternoon sun is hard on aromatic epoxy, which ambers under UV light. We finish most garage, porch and patio floors with an aliphatic polyaspartic topcoat that stays clear and resists hot tire pickup. Indoors, where sunlight is limited, we can use metallic and solid color epoxies that would not survive outdoors.
Free estimate
One call books your in-home measure, and you get a written, itemized quote after the visit.
Mon to Fri 7 AM to 6 PM · Saturday 8 AM to 2 PM · Financing available
Our job-site standards
No surprises on install day. These standards apply to every room we touch, from a single bathroom to a whole house.
We test concrete slabs and wood subfloors before installation and record the numbers on your job sheet.
We check the floor with a long straightedge and fix humps and dips to the flooring maker's tolerance.
Material, underlayment, prep, removal, trim and labor are listed line by line, so you can compare bids.
Floor protection on walkways, plastic dust barriers where we cut or sand, and doorways kept clear.
Debris hauled out, tools stacked, and rooms left usable at the end of each workday.
We walk every room with you, fix anything you flag, and leave labeled spare boards or tile for future repairs.
FAQ
It depends on the system. Many epoxy systems need about 72 hours before vehicle traffic, while polyaspartic topcoats often allow foot traffic the same day and cars in about 24 to 48 hours. We give you a written cure schedule for your exact products.
Epoxy builds thickness and bonds well as a base coat, but standard aromatic epoxy ambers in sunlight. Polyaspartic cures faster and is UV stable, so it makes a better topcoat for garages and patios. Many of our floors use an epoxy base with a polyaspartic topcoat.
We fill and grind cracks before coating, and a full flake broadcast hides most repairs well. Active cracks from foundation movement can still reopen through any coating, so we point those out during the estimate and talk through the options before you commit.
A flake floor has a light texture that grips better than smooth epoxy. For porches, patios, ramps and garages that see rain blown in, we can add an anti-slip additive to the topcoat for extra traction.
Yes. Financing is available on approved credit for garage, patio and commercial coating projects. Ask about payment options when you call, and we will include them with your written estimate.
Also serving
Flake, metallic and solid-color coatings for Grand Prairie garages, porches and commercial floors, ground to a proper profile and topped with a coat that handles Texas sun.
Flake, metallic and solid-color coatings for Mansfield garages, patios and commercial floors, ground to a proper profile and timed around new concrete and summer heat.
Flake, quartz and solid-color coatings for Euless garages, laundry rooms and service areas, with old paint, oil and cracks dealt with before the first coat.
Flake, solid-color and metallic coatings for Bedford garages, porches and shop floors, with old stains and sealers ground off and the slab tested before the first coat.
Garage, patio and shop floor coatings in Hurst, with old paint and oil ground out of the slab and a UV-stable topcoat wherever the sun can reach.
Coatings for Kennedale attached garages, detached shops and outbuildings, with each slab tested and diamond ground and a system picked for what the building holds.
Keep exploring
Commercial
Prep & Removal
Prep & Removal
Call for a free in-home estimate. We measure, test the subfloor and leave you a written quote.
Call (817) 555-0123Mon to Fri 7 AM to 6 PM · Saturday 8 AM to 2 PM · Licensed & insured, Lic. #238190
