Family-owned, licensed & insured. Free in-home estimates in Arlington and nearby cities. Call (817) 555-0123
Epoxy Floor Coating · Hurst, TX
Garage, patio and shop floor coatings in Hurst, with old paint and oil ground out of the slab and a UV-stable topcoat wherever the sun can reach.
Family-owned · Licensed & insured, Lic. #238190 · Financing available
Most epoxy floor coating in Hurst goes onto concrete that has been in service for decades. A garage slab poured in the 1960s or 1970s has usually soaked up oil, been painted or sealed at least once and picked up a few cracks, and all of that has to be dealt with before a coating can bond.
Our main epoxy floor coating page compares flake, metallic and polyaspartic systems. For shops, offices and retail spaces, see our commercial flooring page as well.
About 60 percent of Hurst's housing was built before 1980, and the median home dates to 1975 (American Community Survey, 2020 to 2024). That means many garage floors in the city are 45 years old or more. Oil and transmission fluid soak deep into the surface and keep wicking back up through a coating unless they are degreased and ground out. Earlier paint, sealer or a failed kit has to come off down to clean concrete, because a new system stays bonded only as long as whatever sits beneath it. Cracks from decades of clay movement get filled and ground flush, and we point out the ones likely to move again.
Sun still matters on a northeast Tarrant County garage. Leave the door open on a July afternoon, when highs average in the mid 90s, and the slab nearest the opening sits in direct UV, and aromatic epoxy yellows under it. For garages, porches and patios we finish with an aliphatic polyaspartic topcoat. On the commercial side, the city reports it is about 99 percent developed, so most shop and retail coating work here is on existing slabs, often when a space changes tenants.
Each prep and coating step is explained on the page linked above. For a Hurst garage, porch or patio, the quote includes:
Real projects
Real work from our crews in Arlington and Fort Worth.
Why choose us
10,111
Hurst homes built before 1980 (ACS 2020-2024)
A slab that has carried cars for forty or fifty years needs more than a quick wash. We check how deep the oil has gone, grind away old paint and sealer, and repair cracks and spalls before any coating is mixed. The quote lists that prep as its own line, so you can see where the labor goes.
ASTM F1869
calcium chloride moisture test for slabs
Moisture moving up through a slab on grade can blister or lift a coating from below, and a garage floor that looks dry on top can still test high. We run a calcium chloride test (ASTM F1869) or RH probes where the slab calls for it, and switch to a moisture-mitigating primer when the readings exceed the product's limit.
72 hrs
typical wait before parking on many epoxy systems
Plan on about three days before parking on many epoxy systems, while polyaspartic topcoats often let cars back in after 24 to 48 hours. You get the times for your exact products in writing. Our finished polyaspartic garages in Arlington and Fort Worth, shown in our gallery, let you see the systems first.
Free estimate
We come to you anywhere in Hurst, measure, test the subfloor and leave a written, itemized quote.
Mon to Fri 7 AM to 6 PM · Saturday 8 AM to 2 PM · Financing available
FAQ
Yes, once the old paint is gone. We grind until the paint and any sealer are off and the concrete is open, since anything left on the surface becomes the weak point of the new system. Removal adds time, so it appears as its own line on the quote.
Deep oil can bleed through if it stays in the concrete. We degrease, grind and test the stained areas, and very heavy spots may need an oil-tolerant primer. A flake broadcast also hides small marks that remain after prep.
Yes. Our completed work includes a commercial warehouse floor in Arlington, and a Hurst shop, showroom or back room gets the same treatment: oil removed, the slab ground, joints repaired and moisture tested. Work can be scheduled after hours or in phases so the business stays open.
More in Hurst
Engineered or solid hardwood for established Hurst homes, planned around the slab, the door heights and any original oak already in the house.
Vinyl plank for Hurst homes and rental units, floated or glued down, with the slab tested and any old sheet vinyl or mastic checked before removal.
Laminate planks for Hurst dens, halls and bedrooms, floated over a slab that has been cleared of old glue, tested and flattened first.
New porcelain or ceramic tile for Hurst kitchens and baths, often after the old tile and mortar come out and the slab's cracks are mapped and treated.
Carpet and cushion for Hurst bedrooms, dens and rental units, laid over sound tack strip and power-stretched so it stays flat.
Oak found under old carpet in Hurst homes, repaired, sanded and refinished, with the remaining wood measured before any sanding starts.
Also serving
Flake, metallic and polyaspartic coatings for garages, patios and commercial floors, ground and moisture tested first.
Flake, metallic and solid-color coatings for Grand Prairie garages, porches and commercial floors, ground to a proper profile and topped with a coat that handles Texas sun.
Flake, metallic and solid-color coatings for Mansfield garages, patios and commercial floors, ground to a proper profile and timed around new concrete and summer heat.
Flake, quartz and solid-color coatings for Euless garages, laundry rooms and service areas, with old paint, oil and cracks dealt with before the first coat.
Flake, solid-color and metallic coatings for Bedford garages, porches and shop floors, with old stains and sealers ground off and the slab tested before the first coat.
Coatings for Kennedale attached garages, detached shops and outbuildings, with each slab tested and diamond ground and a system picked for what the building holds.
Service area
Free in-home estimates anywhere in Hurst. Call (817) 555-0123 to book a visit.
Call for a free in-home estimate anywhere in Hurst. Financing available on approved credit.
Call (817) 555-0123Mon to Fri 7 AM to 6 PM · Saturday 8 AM to 2 PM · Licensed & insured, Lic. #238190
